1. Long-service life, no less than the common nail making machine, for at least ten years. Nail transferring belts at low cost and long life which is 5-6 months without an incorrect operation.
2. Automatic oiling system, few lubrication points, much less than normal machines and other nail making machines on market. It is still very tidy when operating.
3. High output, take specification 2550(D-2.5mm* L-50mm) for example, the capacity is about 760 kgs / 8 h.
4. Low Maintenance cost, no dismantle if not change nail mold specifications which can work for 3 months. Punch time is five times than ordinary equipment depending on the actual using status.
The upper and lower nail cutters do cutting without touch, cutting times can reach at least 8 million (8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will be multiplied); low consumption of nail molds, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.
5. Super energy-saving: actual power consumption of High- speed nail making machine is around 3.5KW. Compared to the normal nail making machine, this machine can save electricity around 30 degrees per 1 ton nails output.
6. Easy operation and high efficiency: one person can operate at least 6 machines at the same time. 60% labor cost saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.
7. High quality nails: Detective rate is very low, which is 1/100000, improve the efficiency of coil nail collating and paper strip nail making machine, far different from traditional nail making machine which detective rate is high (3%) and hard to control.
8. Alarming system: Our machine has 7 sensors installed in various parts of the machine. When something abnormal happens, the machine will active stop immediately to protect the machine and tools from damage.
Product Name automatic iron nail making machine
Model No.: SSS-YH-ZDJ-X90
Rated Power: 7KW
Actual Power: 4KW
Output: 760 nails per minute
Wire Diameter: 2.0--3.8mm
Machine Weight: 2800kg
Defective Rate: Below 1/100000
1*20GP: 3 sets nail making machine
1*40GP: 7 sets nail making machine
Labor Demand: 1 worker can operate 10 machines at the same time
Very easy to operate, A common worker can operate this machine after a simple demo. You no longer need to rely on well-trained skillful workers.
1. Labor cost down by 50%--70% on nail making
2. Labor cost down by 35%--45% on nail coiling
3. Cost down about $18.00 by producing 1 ton of nails (Based on price in China)
4. Don't need a high pressure air pump
5. Spare parts are long lasting and with cheap price
One invention patent and two utility model patents: